Industrial Gigabit EPON GPON With 30W PoE Single Port DIN Rail For Passive Optical Network

Olycom Industrial Gigabit PoE EPON GPON

Introduction

The OLYCOM IM-ON100P stands as a robust industrial-grade xPON optical network unit built to deliver integrated fiber access and PoE power supply for field industrial deployments.

This dual-mode ONU seamlessly supports both EPON and GPON access frameworks, eliminating the need to stock separate hardware for different PON host OLT devices.

Engineered to withstand extreme industrial ambient conditions, the unit combines wide-temperature hardware, DIN rail mounting and IP40 enclosure protection alongside IEEE 802.3af/at PoE output.

It integrates advanced layer 2 and basic layer 3 forwarding capabilities to streamline high-bandwidth transmission for surveillance cameras, industrial sensors and field PLC terminals over passive optical fiber backbones.

Built-in watchdog, 250-meter PoE transmission extension and comprehensive remote management tools simplify long-term on-site operation and fault troubleshooting in unmanned industrial sites.

Technical Data

Key Features

• Dual compatible EPON/GPON dual-mode PON port with 2.5G optical transmission, auto-adapts mainstream brand industrial OLT equipment without manual mode switching
• Single 10/100/1000Mbps PoE LAN port compliant with IEEE 802.3af (15.4W) / at (30W) standards, DIP switch enables 250m long-distance PoE signal extension
• Independent Console debugging port for local offline configuration and field fault diagnosis without web access
• Hardware watchdog mechanism auto-recovers offline PoE powered terminals to avoid permanent device disconnection in unstable industrial environments
• Metal corrugated IP40 protection housing, DIN rail mounting design to fit standard industrial control cabinets
• Ultra-wide operating temperature range from -40°C to 75°C, stable running in freezing outdoor substations and high-temperature factory workshops
• Dual redundant DC 44–57V power input with reverse connection protection, prevents downtime from single power circuit failure
• Store-and-forward switching architecture minimizes packet loss for real-time high-definition video stream and industrial control data
• Full EMC Level 4 anti-interference performance against ESD, EFT and surge interference from factory power equipment
• Rich network functional support: DBA dynamic bandwidth allocation, IGMP multicast, port VLAN isolation, static routing and broadcast storm suppression
• Complete remote operation suite including ONU auto-discovery, remote firmware upgrade, power failure alarm and port rate limiting
• Built-in web management platform with PoE timing power control, offline device auto-restart, MAC filtering and firewall security policies

Application

1. Industrial Video Monitoring Backbone
Deployed at fiber distribution nodes to power PoE IP cameras across factory production lines, outdoor perimeter security zones and unattended power substations.
Long-distance PoE extension removes the demand for intermediate power distribution boxes between fiber cabinets and camera terminals.
 

2. Industrial Process Control Networks
Connect field PLC controllers, industrial data acquisition sensors and edge monitoring modules over passive optical PON infrastructure.
Layer 3 routing and VLAN isolation separate control signal traffic from video data to guarantee industrial control transmission priority.
 

3. Outdoor Unmanned Field Sites
Suitable for highway roadside monitoring, mining area data collection and wind/solar new energy station edge networking.
Wide-temperature hardware and surge resistance eliminate damage caused by harsh outdoor climate and lightning interference.
 

4. Enterprise FTTO/FTTB Optical Access
Serves as fiber access terminal for industrial park office buildings, factory office zones and campus branch networks.
Integrated PoE output cuts additional PoE switch deployment costs for desktop VoIP phones and small surveillance devices.
 

5. Intelligent Transportation Network Systems
Applied in tunnel monitoring, highway toll station equipment and railway wayside sensor networking.
Loop detection and automatic port blocking avoid broadcast storms triggered by field wiring errors.
 

6. Smart Municipal Public Infrastructure
Supports city street light monitoring, environmental air quality sensors and community public security camera systems deployed on municipal fiber PON networks.
Timed PoE power scheduling via web console reduces unnecessary power consumption for idle field terminals.

PoE Watchdog

About OLYCOM

1. Company Profile

Founded in 2003, OLYCOM is a technology-oriented provider of fiber optic and networking solutions, focusing on delivering stable, scalable connectivity for global customers across industrial, telecom, and enterprise sectors.

2. Core Offerings

Products include industrial Ethernet switches, DWDM systems, PoE switches, media converters, and optical modules, supporting high-speed transmission, long-distance communication, and flexible network expansion.

3. Application Scenarios

Solutions are widely used in transportation, energy, manufacturing, data centers, security systems, and smart city projects where reliability and performance are critical.

4. Global Presence

OLYCOM serves customers in 120+ countries, working with system integrators, distributors, and operators, adapting to diverse technical and market requirements.

5. Key Strengths

Engineering-driven development, strict quality control (ISO9001, CE, FCC, RoHS), flexible OEM/ODM services, and a strong balance between performance and cost.

6. Vision & Value

Committed to enabling efficient, reliable connectivity, OLYCOM aims to be a trusted global partner in optical communication and network infrastructure.