Gigabit xPON PoE ONU | EPON GPON Optical Network Unit
for IP Surveillance and Fiber Access Networks
Key Features of Gigabit PoE ONU
Specification
|
Product Name |
Gigabit Single-Port xPON PoE ONU |
|
Model No. |
OM-ON100P |
|
PON |
1*SC/UPC Or SC/APC |
|
Wavelength |
Transmit: 1310nm Receive: 1490nm |
|
Receive Sensitivity |
>-28dBm |
|
Lan Port |
1*10/100/1000BASE-T |
|
Power Consumption |
Input voltage:AC 100-240V PoE af/at (15.4W/30W) |
|
Environment |
Working temperature:-20°~ 65°C Storage temperature:-40°~ 85°C Working humidity:10%~90%,non-condensing Storage humidity:10%~95%,non-condensing |
|
EMC |
EC 61000-4-2 (ESD): Level 4 (Contact Discharge±skV, Air Discharge±1skV) IEC 61000-4-4 (EFT):Level 4 (Power: +4kV; Ethenet Port: +2kV) IEC 61000-4-5 (Surge):Level 4 ( Power: Common Mode ±4kV, Differential Mode ±2kV) IEC 61000-4-5 (Surge):Level 4 (Ethernet Port: Common Mode±4kV, Differential Mode±2kV) |
|
Safety |
CE Mark ,commercial CE/LVD EN60950 |
|
Mechanical Information |
Dimension: 160 x 123 x 40mm Mounting method:desktop mounting |
|
Warranty |
1 year |
|
Software |
|
|
Standard Compatibility |
Compliant with IEEE 802.3ah and ITU-T G.984 standards |
|
Security Protection |
Supports broadcast storm suppression |
|
Intelligent Management
|
Supports ONU automatic discovery, link detection and software remote upgrade |
|
Multicast |
Supports IGMP transparent / snooping / proxy mode |
|
Flexible Registration |
Support multiple registration methods |
|
Bandwidth Management |
Support Dynamic Bandwidth Allocation (DBA) |
|
Network Isolation |
Support port VLAN configuration |
|
Routing |
Support Layer 3 routing function |
|
MAC Management |
Support MAC address learning |
|
Fault Diagnosis |
Supports power failure alarm function, which is convenient for troubleshooting link failures |
|
Traffic Control |
Supports port-based rate limiting and bandwidth control |
|
Transmission Optimization |
Supports port traffic control |
Application
![]()
![]()
Application
OM-ON100P provides fiber-based network access and PoE power supply for IP cameras through xPON technology.
Suitable for:
The device supports IEEE 802.3af/at PoE output for powering compatible Ethernet devices.
With dual-mode EPON and GPON support, OM-ON100P provides flexible fiber access solutions for different network infrastructures.
Applications:
It complies with IEEE 802.3ah and ITU-T G.984 standards.
The built-in AC power supply design simplifies installation without requiring an external power adapter.
Applications:
Provides stable fiber connectivity and PoE power for network terminals in campus environments.
Applications:
Compatible with mainstream OLT equipment and suitable for subscriber-side ONU deployment in PON networks.
FAQ:
OM-ON100P is a Gigabit single-port xPON PoE ONU integrating fiber access and PoE Ethernet output.
It supports:
Yes. OM-ON100P supports dual-mode EPON and GPON access for flexible network deployment.
Yes. It supports IEEE 802.3af/at PoE output and can provide power and network connectivity for compatible IP cameras.
No. OM-ON100P has a built-in power supply and supports 100-240VAC input.
Yes. It is compatible with mainstream OLT equipment for stable PON network deployment.
Compared with standard ONU devices, OM-ON100P integrates PoE power output and Gigabit Ethernet access, making it suitable for IP cameras and powered Ethernet terminals.