Introduction
TA705-PSE-FE 10/100Mbps POE network copper switch provides IEEE 802.3af/at Power Sourcing Ethernet (PSE) functionality on the 4 twisted pair ports, supplying both data and electric current to devices such as WiFi access points, VoIP phones and IP security cameras.
Key Features
1 x 10/100/1000M uplink port
External power supply
Diagnostic and unit LEDs and PoE current indicator LEDs
Specification
| Standard | IEEE802.3 (10BASE-T), IEEE802.3u 100BASE-TX/FX (Fast-Ethernet), IEEE802.3x (Flow Control), IEEE802.1q, IEEE802.3af PoE/PSE |
| 10/100/1000BASE-T | STP or UTP Category 5/5e/6 cable (Max. 100m) |
| Conversion Mode / Delay Time | Store-and-Forward < 10us, straight-through<0.9us |
| Flow control | Full duplex-flow control, Half duplex-back pressure |
| RJ-45 Port | 4 x Auto-MDI/MDIX |
| Input Voltage | AC100 ~ 240V / 50-60HZ to 48V via external adapter |
| Power Consumption | <2.5W (idle), 60W (full-load) |
| PoE Pin Assignment | 1/2 (V+),3/6 (V-) 4/5 (V+),7/8 (V-) |
| PoE Output Voltage | 48V, 1.85A, 80W |
| MTBF | 50,000 hours |
| BER | <1/1000000000 |
| MAC Address Table | 1K |
| Buffer Size | 1M |
| Operation Temperature | 0℃~50℃ |
| Storage Temperature | -40℃~70℃ |
| Storage Humidity | 160mm ×95mm ×28mm |
| Dimensions and Weight | 0.78 kg (Gross Weight) |
Application
Order Details
| TA705-PSE-FE | PSE/PoE Ethernet switch, 10/100Mbps, 5 UTP, 220VAC in, 48VDC out, 100m |
| TA714-PSE-FE/S20-SC | PSE/PoE fiber switch, 10/100Mbps, 1 fiber to 4 UTP, 220VAC in 48VDC out, SMF, dual fiber, 20Km, SC |
| TA714-PSE-FE/S40-SC | PSE/PoE fiber switch, 10/100Mbps, 1 fiber to 4 UTP, 220VAC in 48VDC out, SMF, dual fiber, 40Km, SC |
| TA714-PSE-FE/S60-SC | PSE/PoE fiber switch, 10/100Mbps, 1 fiber to 4 UTP, 220VAC in 48VDC out, SMF, dual fiber, 60Km, SC |
| TA714-PSE-FE/S80-SC | PSE/PoE fiber switch, 10/100Mbps, 1 fiber to 4 UTP, 220VAC in 48VDC out, SMF, dual fiber, 80Km, SC |
| TA714S/U-PSE-FE/S20-SC | PSE/PoE fiber switch, 10/100Mbps, 1 fiber to 4 UTP, 220VAC in 48VDC out, SMF, single fiber, 20Km, SC |
