Web Managed Gigabit Ethernet Switch 10 Port Industrial Network Switch IM-FS280GW

10 Port Layer 2 Web Managed Industrial Gigabit Switch

Introduction

• IM-FS280GW series is the 10/100/1000 Mbps industrial fiber switch operating temperature -40℃ to +75℃.
• Support wide voltage dual power input, support web management.
• Meet IP40 protection degree and EMC industrial grade requirements
• DIN rail installation
• Pass through dangerous environmental certification and comply with FCC and CE standards
• The reliable industrial grade design could ensure continuous and stable operation of the automation system.

Key Features

• 6KV Ethernet surge protection, adapt to a harsh outdoor environment
• Support Auto MDI/MDIX
• Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
• IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
• A store-and-forward switching mechanism
• Support cable diagnosis and can locate the fault point
• Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption
• Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
• Support Qos, transport classification Qos, Cos, bandwidth control (input/output direction), storm suppression , differentiated services
• Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN,Protocol VLAN,VLAN convert, MVR
• Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
• Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
• Support IGMP agent report, MLD snooping
• Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,HTTP/HTTPS, SSL/SSH v2
• Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
• Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing
• Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
• Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
• Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL

Specification

Application

.

FAQ

How can I install the device?

A: Each model in this series supports DIN35/Wall mounting.

It requires necessary accessories in installation like screws, mounting kit etc., some of them are included in the packing box, some are not.

Does your switch support 155Mb/s tranceivers?

A: Yes, the optical speed is 100M/1000M/2500M. Please just configure 100M speed in the management interface, megabit modules are working.

Can you let me know how the indicators work?

A: This is our Vitesse based managed switch series and all models share the same indicator definition as below.

PWR: Power

FX: Fiber port(1/2/3/4)

Orange: Link/ACT

Green: 1000M Network Speed(off when it is 100Mb/s)

Do you do SKD/CKD?

A: Yes, we have dealt with this many times.

As a factory, we have enough energy and resources to handle this.

Can I add my logo/model in the management?

A: Yes, it is easy and free of cost, please just send your model name and logo in PS/AI format. We will do the rest and send a photo for your confirmation.

Do your switches support any ring protocols?

A: Yes, our switches support STP/RSTP/MSTP and ERPS for ring configuration.