4 Port 10/100/1000Mbps Ethernet Switch unmanaged with SFP uplinks
Overview of gigabit network switch
LED Description of fiber optic Ethernet switch
There are 3×3 LED At Front View of 4 port Gigabit Ethernet Switch
100 | Lit when TP1/TP2 speed is 100Mbps |
1000 | Lit when TP1/TP2 speed is 1000Mbps |
Link/Act |
Lit when TP1/TP2 connection is good. Blinks when TP1/TP2 data is transmitting. |
SFP1 |
Lit when SFP1 connection is good. Blinks when SFP1 data is transmitting. |
SFP2 |
Lit when SFP2 connection is good. Blinks when SFP2 data is transmitting. |
PWR | Lit when +5V power is coming up. |
SFP Module Fiber Optic Technical Specification
1000Base-SX | 1000Base-LX-20 | |
Connector type | LC | LC |
Fiber type | Multi-mode | Single-mode |
Wavelength | 850nm | 1310nm |
Max Distance |
62.5µm: 224m 50µm: 550m |
20Km |
Min TX PWR | -12.0dBm | -11.0dBm |
Max TX PWR | -6.0dBm | -5.0dBm |
Sensitivity | < -19dBm | < -22dBm |
Link Budget | 7.0dBm |
11.0dBm
|
Technical Specification of gigabit ethernet switch
The Four Port Gigabit Ethernet Switch conforms to the following standards:
Standards: IEEE 802.3z/AB 10/1001000Base-T/1000Base-SX/LX/ZX
UTP Cable: Cat.5e or Cat.6 cable up to 100m.
Fiber Cable: 1000SX: 50/125,62.5/125µm multi-mode/1000LX/ZX: 8/125, 9/125µm single-mode.
Data Transfer Rate: RJ45 port: 10M, 100M, 1000Mbps/SFP: 1000Mbps speed.
LED Indicators: TP 100, TP 1000, TP Link/Act, SFP1, SFP2, PWR
Duplex Modes: RJ45 port: Full/Half Duplex/auto- negotiation
SFP: full-duplex mode
Power Requirement: 220V(170-260V)AC,50Hz or DC48V
Ambient Temperature: 0 ~ 50℃
Humidity: 5% ~ 90%
Dimension:27*123*85mm(H×W×D)
Installing the 4 port Gigabit Switch
Checklist
Before you installing the Switch, verify that the package contains the following:
Please notify your sales representative immediately if any of the aforementioned items is missing or damaged.
More Product Photos