10G SFP+ Unmanaged Media Converter
Introduction to Network Media Converter
Product model: TA810-10G-E, it is fine to write your model name
|
Standards
|
1000Base-T, 2.5GBase-T, 5Gbase-T, 10Gbase-T
1000Base-X, 2500Base-X, 5GBase-R , 10GBase-R
|
|
Media Supported
|
1000Base-T: Cat5 UTP/STP. MAX 100m
2.5GBase-T: Cat5e UTP/STP. MAX 50m
5GBase-T: Cat5e UTP/STP. MAX 50m
10G Base-T: Cat6a UTP/STP. MAX 50m
|
|
Port Type
|
RJ45, SFP Slot
|
|
Work Mode
|
1000Base-T to 1000Base-X
2.5GBase-T to 2500Base-X
5Gbase-T to 5GBase-R
10Gbase-T to 10GBase-R
|
|
Support Modules
|
10GBASE-SR/LR/ER/ZR
50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 300m
9/125μm single-mode fiber optic cable, up to 10/40/80km
|
|
Power Supply
|
12V DC
|
|
Power consumption
|
MAX 5W
|
|
Operation Temperature
|
0℃ to 55℃
|
|
Relative Humidity
|
5% to 80% (non-condensation)
|
Interface of Unmanaged Media Converter
LED Description of 10G Media Converter
| LED | Status | Description |
| PWR | On | Power is on and normal. |
|
FX Link/Act |
On |
Connection status display for Fiber Link. “ON” indicates that Fiber link is in correct connection. |
|
Blink |
Active status display of fiber link. “Blink” indicates packet goes through FX end. |
|
| SD | On | Fiber signal is detected. |
|
10G |
On | Transfer rate of electric interface is 10Gbps. |
| Off | Rate of electric interface is 10Mbps. | |
|
TX Link |
On |
Connection status display for electric link. “ON” indicates that electric link is in correct. |
|
TX Act |
Blink |
Active Status display of fiber link “Blink” indicates packet goes through TX end. |
Application of Fiber Ethernet Converter
