Poe Industrial Switch 8ports Gigabit Ethernet With Managed Console Port
IM-FP688GW series is the 10/100/1000Mbps Poe Industrial Switch which comply with POE 15,4W/30W, power on POE IP cameras through the Ethernet cable, simple construction, power range up to 100 meters, operating temperature-40 ℃ to + 85 ℃, meet IP40 protection degree and EMC industrial grade requirements, DIN rail installation, pass through dangerous environmental certification and comply with FCC and CE standards. The reliable industrial grade design could ensure continuous and stable operation of the automation system.
POE power on to 1 ~ 8RJ45 ports
8 x 10/100/1000Mbps Auto-sensing RJ45 ports
6 x 1000Mbps SFP fiber port
IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption
STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
Qos, transport classification Qos, Cos, bandwidth control
(input/output direction), storm suppression ,differentiated services
IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN,
Protocol VLAN,VLAN convert, MVR
Dynamic IEEE802.3ad LACP link aggregation, static link aggregation
IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
IGMP agent report, MLD snooping
Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,HTTP/HTTPS, SSL/SSH v2
Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
Software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing
DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL.
|Product Name||Poe Industrial Switch (6F+8TP)|
6 x 1000Mpbs SFP port
SM:1310nm/1550nm,20Km ;1490nm/1550nm, 40~120Km; MM:1310nm, 2Km;
8 x 10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing)
|Standard||IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344, IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az|
|MAC Address Table Size||8K|
Transmission mode:storage and forward
System bandwidth:40Gbps (non-traffic jam)
10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m)
100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m)
SFP port,transmission distance: 20Km,40Km,60Km,80Km,100Km
|LEDs||Power, network, fiber|
POE power supply input voltage: 48V (max 52V),
Single PoE power supply output power: 15.4W (port 1~6)
(802.3at standards required special instructions)
|Environment||Working Temp:-40°～ 85°C ; Storage Temp:-40°～ 85°C;Working humidity:10%～90%, non-condensing; Storage humidity:10%～95%, non-condensing|
EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A
EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8; Traffic Control:NEMA-TS2; Vibration:IEC 60068-2-6; Freefall:IEC 60068-2-32; Shock:IEC 60068-2-27; Rail Traffic:EN 50121-4
|Safety||CE Mark ,commercial ; CE/LVD EN60950|
Shell:Corrugated metal shell; Safety class:IP40;
Dimension:158 x 114.8 x 60mm;
Mounting method:Din-rail mounting
|Warranty||Replacement within 1year; 5 years repairing|
SHA is an acronym for Secure Hash Algorithm. It designed by the National Security Agency (NSA) and published by the NIST as a U.S. Federal Information Processing Standard. Hash algorithms compute a fixed-length digital representation (known as a message digest) of an input data sequence (the message) of any length.
A shaper can limit the bandwidth of transmitted frames. It is located after the ingress queues.
SMTP is an acronym for Simple Mail Transfer Protocol. It is a text-based protocol that uses the Transmission Control Protocol (TCP) and provides a mail service modeled on the FTP file transfer service. SMTP transfers mail messages between systems and notifications regarding incoming mail.
The SubNetwork Access Protocol (SNAP) is a mechanism for multiplexing, on networks using IEEE 802.2 LLC, more protocols than can be distinguished by the 8-bit 802.2 Service Access Point (SAP) fields. SNAP supports identifying protocols by Ethernet type field values; it also supports vendor-private protocol identifier.