1G SFP to RJ45 Mini-Gbic Module - 1000Base-T Copper Transceiver Compatible with Cisco, Ubiquiti, D-Link, Netgear TP-LINK
Product Overview
OST01 10/100/1000BASE-T copper SFP transceiver is high performance, cost effective module. Compliant with the Gigabit Ethernet and 10/100/1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, Supporting 10/100/1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The OST01 supports 10/100/1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modula-tion (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The OST01 provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2-wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2-wire serial bus at address ACh.
Features
Applications
Ordering
Part No. | Data Rate(Mbps) | Reach(km) | Temperature |
OST01 | 10/100/1000Mbps, with SGMII interface, enable the auto-negotiation default, support Rx_LOS as link indication function, | 0.1 | -40℃~85℃ |
OST01N | 10/100/1000Mbps, with SGMII interface, enable the auto-negotiation default, does not have a link indication feature (RX_LOS is internally grounded) | 0.1 | -40℃~85℃ |
Parameters
Pin | Signal name | Description | MSA Notes |
1 | VEET | Transmitter ground (common with receiver ground) | |
2 | TFAULT | Transmitter Fault. Not supported | Note 1 |
3 | TDIS | Transmitter Disable. PHY disabled on high or open | Note 2 |
4 | MOD_DEF(2) | Module Definition 2. Data line for Serial ID. | Note 3 |
5 | MOD_DEF(1) | Module Definition 1. Clock line for Serial ID. | Note 3 |
6 | MOD_DEF(0) | Module Definition 0. Grounded within the module. | Note 3 |
7 | Rate Select | No connection required | |
8 | LOS | Loss of Signal - High Indicates Loss of Signal | |
9 | VEER | Receiver Ground (common with transmitter ground) | |
10 | VEER | Receiver Ground (common with transmitter ground) | |
11 | VEER | Receiver Ground(common with transmitter ground) | |
12 | RD- | Receiver Inverted DATA out. AC Coupled | Note 5 |
13 | RD+ | Receiver Non-inverted DATA out. AC Coupled | Note 5 |
14 | VEER | Receiver Ground (common with transmitter ground) | |
15 | VCCR | Receiver Power Supply | Note 6 |
16 | VCCT | Transmitter Power Supply | Note 6 |
17 | VEET | Transmitter Ground (Common with Receiver Ground) | |
18 | TD+ | Transmitter Non-Inverted DATA in. AC Coupled. | Note 7 |
19 | TD- | Transmitter Inverted DATA in. AC Coupled. | Note 7 |
20 | VEET | Transmitter Ground(common with receiver ground) |
Product Photos