November 11, 2021
A managed gigabit switch allows users to flexibly control Ethernet ports performance, enabling them to configure and monitor the network in more combined ways.
Usually this requires a highly skilled operator or administrator to make full of them and higher cost than unmanaged network switch.
Olycom offer L2 managed gigabit switch to meet normal management usage. Actually there are L3 managed Ethernet switch in the market which can have IP addresses and perform routing.
In a managed switch, there are many configurations such as Vlan, LDDP, SNMP v1/v2c/v3 etc.
A user can log in Olycom 100/1000M gigabit managed fiber switch by IP address or console port. For the former, just log in the IP address with username and password and manage the gigabit fiber switch, another way is to connect the cable(we will equip it if you order a 10 port manageable gigabit industrial switch from us) to the console port.
Our managed switch interface would be like below picture on which you can realize different functions like
Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN, Protocol VLAN,VLAN convert, MVR
Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL
Basically in large projects or complicated networking designs, a core managed switch is necessary to control and process data from different sources.
Olycom offers a wide variety of web-managed switch covering different ports. Some hot-selling models are 10 port industrial gigabit managed switch, 1000M industrial managed fiber switch and 1U rack manageable Ethernet POE switch.
Please contact us if you need more details about our industrial gigabit managed switch.
|Contact Person :||Sales|