Mini 10G Media Converter Unmanaged SFP+ Fiber Optic To 10GBased-T Rack Mountable CE

10G SFP+ Fiber Optic Media Converter

Introduction to 10G Media Converter

1. IEEE802.3z/Az 10G converter supports two types media for network connection such as 10G Base-T and 10G SFP+.
2. The media converter is designed with a switch controller and buffer memory that connects two types segments to operate smoothly.
3. With external power unit, it provides good stability and reliability.
4. Support Jumbo Frame
5. Transparent Transport and very low delay
6. Support ITUT-prescribed DWDM/CWDM wavelength
7. Support to install into 1U Rack 12slot Rack 
8. Full State Led display
9. Easy installation
10. UTP cable length detection(only RJ45 interface)

Specification of Unmanaged Media Converter

Application of Fiber Media Converter

• Connection between fiber to copper 1.25G~10Gbps Ethernet equipment function as fiber-to-copper media converter for long distance transmission
• Media converter for network backbone(SAN, LAN, MAN)
• Can be applied in Telecommunication room, R&D laboratory, Data center, and etc.

Warranty

1 year for commercial products and 3 years for industrial products.

• The customer is responsible for delivering the defective product to the designated RMA Address for repair or replacement. Olycom will repair or replace a product that was found defective by Olycom during the warranty period at its discretion. The sole responsibility of Olycom under this warranty shall be limited to repair of this product, or replacement thereof, at the sole discretion of Olycom.
• All RMA items shipped to Olycom must be freight prepaid.
• The repaired products would be returned within 1 month after receiving the returned materials. Freight charge should be paid by the sender.

FAQ

1. What speed rates does this media converter support, and is it backward compatible with lower speed equipment?

This media converter supports a wide range of transmission speeds including 10M, 100M, 1.25G, 2.5G, 5G, and full 10Gbps, making it one of the most flexible media conversion solutions available for mixed-speed network environments.

This multi-rate capability means it can seamlessly bridge connections between legacy Gigabit equipment and modern 10G infrastructure without requiring additional adapters or intermediate devices. Whether you are upgrading an existing network in stages or connecting equipment from different generations, this converter handles the speed negotiation automatically.

It complies with IEEE 802.3an (10GBase-T) and IEEE 802.3ae (10GBase-SR/LR/ER/ZR) standards, ensuring broad interoperability with switches, routers, and servers from all major vendors.

2. What is the maximum fiber transmission distance this converter can achieve?

The transmission distance depends on the SFP+ module installed. With a standard SFP module, distances of up to 40km can be achieved, while using an SFP+ or XFP module extends the reach to up to 80km over single-mode fiber.

For copper connections on the RJ45 side, it supports 10GBase-T transmission over Cat6a cable at distances of up to 100 meters, which is the standard maximum for 10G copper links. A built-in UTP cable length detection function is also available on the RJ45 interface, allowing technicians to verify cable integrity during installation without additional test equipment.

The converter also supports DWDM and CWDM wavelengths as prescribed by ITU-T standards, making it fully compatible with wavelength division multiplexing infrastructure for high-density fiber deployments.

3. What are the typical applications for this 10G fiber media converter?

This converter is designed for professional network environments where high-throughput fiber-to-copper conversion is required at the 10G level.

Primary use cases include connecting fiber backbone segments to copper-based servers or storage equipment in data centers, extending 10G links across SAN, LAN, and MAN network architectures, and bridging fiber and copper segments in telecommunication rooms and R&D laboratories where equipment from different media types needs to interoperate seamlessly.

Its support for Jumbo Frames, transparent transport, and very low latency make it particularly well suited for storage networking, high-frequency trading environments, video production facilities, and any application where large data payloads and minimal processing delay are critical requirements.

4. Can this converter be installed into a rack, and what are its power requirements?

Yes. In addition to standalone desktop operation, this converter supports installation into a 1U rack chassis accommodating up to 12 slots, making it ideal for data centers and telecommunication rooms where multiple converters need to be housed in a neat and manageable rack-mounted configuration.

Power is supplied via an external DC 5V to 12V adapter with a maximum power consumption of just 3W, keeping heat generation minimal even in densely populated rack installations. The low power draw also contributes to overall energy efficiency in large-scale deployments where many units are operating continuously.

A full-state LED display on the front panel provides real-time visibility of link status and activity on both the fiber and copper interfaces, allowing quick visual verification of converter operation without any management software or additional monitoring tools.